The Gangstop pusher foot is a 1300mm long, flat pushing attachment for the TigerStop. .
#100500401
Spring Buffer 700mm
E-SB-700
Regular price
€250,00
/
The spring buffer 700mm is a pushing attachment for the TigerStop to absorb heavy impacts. A roller carriage (E-RC) must also be ordered with the Spring Buffer 700mm for extra stability.
#100510701
Spring Buffer 1000mm
E-SB-1000
Regular price
€280,00
/
The spring buffer 1000mm is a pushing attachment for the TigerStop to absorb heavy impacts. A roller carriage (E-RC) must also be ordered with the Spring Buffer 1000mm for extra stability.
#100510801
Spring Buffer 1300mm
E-SB-1300
Regular price
€320,00
/
The spring buffer 1300mm is a pushing attachment for the TigerStop to absorb heavy impacts. A roller carriage (E-RC) must also be ordered with the Spring Buffer 1300mm for extra stability.
#100510901
Roller Carriage
E-RC
Regular price
€185,00
/
TigerStop's Roller Carriage must be included with Spring Buffer 1000mm and Spring Buffer 1300mm to supply additional stability.
#101260102
Flip Away
STOP2
Regular price
€258,00
/
The Flip Away is the external portion of the TigerStop carriage. It provides two T-slots for mounting various pushing attachments, and a hinged mount to allow the pusher to be lifted out of the way when necessary. The modern flip away is compatible with TigerStops built in 1999 or later (i.e. with the hinge mount behind the beam).
#101430102
Internal Carriage
ISC
Regular price
€219,00
/
The internal carriage connects the TigerStop belt inside the beam to the flip away outside of the beam. It ships assembled with Polymer Linear Guides (PLG), and includes the belt clamp (ATC32).
#102370201
Idle End Carriage
IEC2
Regular price
€236,00
/
The Idle End Carriage/Far End Carriage is for TigerStops using a 32mm (1.26") width belt. It contains the idle pulley, the pulley housing, and the tensioning bolt.
Learn more about the Idle End Carriage in the below video.
#101190101
U Slot
USL
Regular price
€1,20
/
This hard plastic trim fits snugly in the T-slots on TigerStop extrusions, and is sometimes used to conceal and protect small cables. U-slot is ordered in 1 foot (0.305m) increments. There are four orange U Slots per TigerStop that travel the length of the extrusion.
#1043102
Idle End Cap
EC2, 10144
Regular price
€57,00
/
The Idle End Cap is a plate that covers the end of the TigerStop extrusion that is far from the motor.
Dust Seal Strip
DS
Regular price
€4,95
/
Dust seal strip helps keep dust and debris out of the TigerStop beam. Dust seal strip is ordered in a single strip in 1 meter increments. Every TigerStop has two dust seal strips the full length of the beam.
#101470101
Roller Carriage Flip Away
E-STOP2-RC
Regular price
€258,00
/
The Roller Carriage Flip Away is compatible with the Roller Carriage (E-RC).
#101430103
TigerAngle Spring Buffer 1500mm
E-SB-1500
Regular price
€340,00
/
The spring buffer 1500mm is a pushing attachment for the TigerAngle to absorb heavy impacts. A roller carriage (E-RC) must also be ordered with the Spring Buffer 1500mm for extra stability.
Thank You For Shopping with TigerStop Europe!
Please note that most products must be installed by a TigerStop Certified Technician or Dealer.
We kindly ask that you list your preferred Dealer's name in the notes section during checkout.