TigerSaw Parts

This is the throat plate for the back fence on the TigerSaw 1000G2 and TigerSaw 2000. It is not compatible with TigerSaw 1000G1 (models from 2016 and before).  

This is the throat plate for the table top on the TigerSaw 1000 (second generation model, 2016-current) and TigerSaw 2000. It is not compatible with TigerSaw 1000G1 (models from 2013 and earlier).   

This is a box of 50 UV crayons for use with the crayon defecting option on TigerSaw 1000, TigerSaw 1000G2, or TigerSaw 2000.  

Learn more about Crayon Defect Marking in the below video.  

This is a replacement idle pulley for TigerSaw saw systems.  

Top Cap for TigerSaw 1000 and TigerSaw 2000.  

This belt connects the saw motor to the saw arbor in a TigerSaw 1000, TigerSaw 1000G2, or TigerSaw 2000. 

This is a printer cartridge for the inkjet printing system designed for non-absorbent, non-porous surfaces like metal. This product is compatible with the TigerSaw 2000 fully automatic saw system. 

Note: This printer cartridge is incompatible with the inkjet printing system for absorbent surfaces.  

TigerSaw 1000 Soft Start 460 Volts/480V. 

Note: Saw System installations and repairs should be done by a TigerStop LLC certified technician.  

This is a printer cartridge for the inkjet printing system designed for absorbent and porous surfaces like wood. This cartridge pairs well with TigerSaw 1000 fully automatic saw systems. 

Note: This printer cartridge is incompatible with the inkjet printing system for non-absorbent surfaces. 

This is a replacement pilot light for the TigerSaw 1000 and TigerSaw 2000. 

This blade is compatible with the TigerSaw 1000 (second generation saw system) and the TigerSaw 2000. It is intended for wood applications where throughput is the most important consideration. The diameter of this blade is 500 mm (19.7"), and it has 60 teeth.  

#417690103  

This blade is compatible with the TigerSaw 1000 (second generation saw only) and the TigerSaw 2000. It is designed for cutting hollow aluminum extrusions. The diameter of this blade is 500 mm (19.7"), and it has 120 teeth.  

#411200102

This blade is compatible with the TigerSaw 1000 (second generation saw only) and the TigerSaw 2000. It is intended for wood applications where cut quality is the most important consideration. The diameter of this blade is 500 mm (19.7"), and it has 144 teeth. 

#417690104

TigerStop's Scanning Pusher Foot can be used on TigerSaw 1000s and TigerSaw 2000s. Mark defects with a UV crayon and the Scanning Pusher Foot will scan material and cut out the defects while optimizing the clear material.