TigerStop Europe

TigerStop Mini Gangstop Pusher Foot: 1.000mm

#100500301 

The spring buffer 700mm is a pushing attachment for the TigerStop to absorb heavy impacts. A roller carriage (E-RC) must also be ordered with the Spring Buffer 700mm for extra stability. 

 #100510701

The spring buffer 1000mm is a pushing attachment for the TigerStop to absorb heavy impacts. A roller carriage (E-RC) must also be ordered with the Spring Buffer 1000mm for extra stability. 

#100510801 

The spring buffer 1300mm is a pushing attachment for the TigerStop to absorb heavy impacts. A roller carriage (E-RC) must also be ordered with the Spring Buffer 1300mm for extra stability. 

 #100510901 

TigerStop's Roller Carriage must be included with Spring Buffer 1000mm and Spring Buffer 1300mm to supply additional stability.   

#101260102

The internal carriage connects the TigerStop belt inside the beam to the flip away outside of the beam. Ships assembled with Polymer Linear Guides (PLG). 

The Idle End Carriage/Far End Carriage is for TigerStops using a 32mm (1.26") width belt. It contains the idle pulley, the pulley housing, and the tensioning bolt. 

Learn more about the Idle End Carriage in the below video.  

The Idle End Cap is a plate that covers the end of the TigerStop extrusion that is far from the motor.  

Dust seal strip helps keep dust and debris out of the TigerStop beam. Dust seal strip is ordered in a single strip in 1 meter increments. Every TigerStop has two dust seal strips the full length of the beam. You may order just the total length you need (example TigerStop 6.8 is total 7.4 meter, so you order 15 meter)

The Roller Carriage Flip Away is compatible with the Roller Carriage (E-RC).  

#101430103 

The spring buffer 1500mm is a pushing attachment for the TigerAngle to absorb heavy impacts. A roller carriage (E-RC) must also be ordered with the Spring Buffer 1500mm for extra stability. 

The belt clamp (ATC32 and M4037) can be used with the belt clamp alignment tool (B0700) for all TigerStops with 32mm belting.   

To learn how to replace a TigerStop belt watch this informational video here.: 

A 2.4m (8') working length, 3m (10') overall length SawGear will greatly increase productivity and throughput. Your SawGear can position parts to +/- .2mm" repeatable accuracy which will greatly reduce scrap waste and labor.  

#105000201

A 2.4m SawGear comes with the following items:  

• 2.4m Measuring Bar (MB12)
• Power Head (SG-PH)
• Flip Away Stop (SG-FS)
• Carriage Assembly (SG-SC)
• Pulley Assembly (MB-P)

 A SawGear 2.4m does NOT come with tables. You may attached a SawGear to your own work bench, SawGear Tables, or TigerStop solid or roller tables. 

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

A 3.6m (12') working length 4.1m (14') overall length SawGear will greatly increase productivity and throughput. Your SawGear can position parts to +/- .2mm" repeatable accuracy which will greatly reduce scrap waste and labor. 

#105010201

A 3.6m SawGear comes with the following items: 

• 3.6m Measuring Bar (MB12) 
• Power Head (SG-PH)
• Flip Away Stop (SG-FS)
• Carriage Assembly (SG-SC)
• Pulley Assembly (MB-P)

*Note: A SawGear 3.6m does NOT come with tables. You may attached a SawGear to your own work bench, SawGear Tables, or TigerStop solid or roller tables. 

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

A 4.8m (16') working length 5.4m (18') overall length SawGear will greatly increase productivity and throughput. Your SawGear can position parts to +/- .2mm" repeatable accuracy which will greatly reduce scrap waste and labor.  

#105400101

A 4.8m SawGear comes with the following items: 

• 4.8m Measuring Bar (MB16)
• Power Head (SG-PH)
• Flip Away Stop (SG-FS)
• Carriage Assembly (SG-SC)
• Pulley Assembly (MB-P)

*Note: A SawGear 4.8m does NOT come with tables. You may attached a SawGear to your own work bench, SawGear Tables, or TigerStop solid or roller tables. 

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

A 6m (20') working length 6.7m (22') overall length SawGear will greatly increase productivity and throughput. Your SawGear can position parts to +/- .2mm repeatable accuracy which will greatly reduce scrap waste and labor.  

#105420101 

A 6m SawGear comes with the following items: 

• 6m Measuring Bar (MB16)
• Power Head (SG-PH)
• Flip Away Stop (SG-FS)
• Carriage Assembly (SG-SC)
• Pulley Assembly (MB-P)

A SawGear 6m does NOT come with tables. You may attached a SawGear to your own work bench, SawGear Portable Tables, or TigerStop solid or roller tables. 

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSH@TIGERSTOP.NL WITH ANY QUESTIONS. 

The measuring bar is essentially a SawGear without the power head. Power heads can be mounted on either the left or the right side of the measuring bar, simply and quickly. MB08 is a 2.4m (8') working length 3m (10') overall length measuring bar.    

Note: The power head (PH) is required to operate a SawGear.  

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

SawGear Measuring Bar 3.6m (12') working length 4.1 (14') overall length. T. 

The measuring bar is essentially a SawGear, but without the power head. Power heads can be mounted on either the left or the right side of the measuring bar, simply and quickly. In order to operate your SawGear a power head (PH) is required.

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS.  

The measuring bar is essentially a SawGear without the power head. Power heads can be mounted on either the left or the right side of the measuring bar, simply and quickly. MB16 is a 4.8m (16') working length 5.4m (18') overall length measuring bar. In order to operate your SawGear a power head (PH) is required.  

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

The measuring bar is essentially a SawGear without the power head. Power heads can be mounted on either the left or the right side of the measuring bar, simply and quickly. E-MB06 is a 6m working length (6.7m overall length) measuring bar. In order to operate your SawGear a power head (PH) is required.  

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

SawGear table leg. 

 #105380101

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

SawGear Solid Tables, 240mm wide, 3m overall length. Perfect for SawGear 2.4m working length and 3m overall length machine.

#105150101

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

A SawGear Solid Table 240mm wide, 4.1m overall length. Perfect for SawGear 3.6m working length and 4.1m overall length machine.

#105160101

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL WEBSHOP@TIGERSTOP.NL WITH ANY QUESTIONS. 

SawGear Solid Table 240mm wide, 5.4m overall length. Perfect for SawGear 4.8m working length and 5.4m overall length machine. 

#105160201

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY ITEMS IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL ORDERSEUROPE@TIGERSTOP.COM WITH ANY QUESTIONS.   

A SawGear Solid Table 240mm wide, 6.7m overall length. Perfect for SawGear 6m working length and 6.7m overall length machine.

#105160301

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL ORDERSEUROPE@TIGERSTOP.COM WITH ANY QUESTIONS. 

SawGear Plastic Roller Tables, 240mm wide, 3m overall length. Perfect for SawGear 2.4m working length and 3m overall length machine.

 #105100101

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL ORDERSEUROPE@TIGERSTOP.COM WITH ANY QUESTIONS. 

SawGear Plastic Roller Tables, 240mm wide, 4.1m overall length. Perfect for SawGear 3.6m working length and 4.1m overall length machine.

#105110101 

*NOTE: UPS SHIPPING DOES NOT APPLY ON ANY MACHINERY IN THE SAWGEAR STORE COLLECTION. SHIPPING RATES WILL BE CALCULATED AND COLLECTED AFTER THE ONLINE ORDER IS PLACED TO GUARANTEE THE LOWEST FREIGHT RATE POSSIBLE. EMAIL ORDERSEUROPE@TIGERSTOP.COM WITH ANY QUESTIONS.